Precor P82 Getting Started Manual

Welcome to a
The intuitive high-definition touchscreen, easy-to-reach single or dual motion controls, and built-in fitness tutorials
make the P82 Console an unique fitness experience for your members and trainers.

Set up the console

The P82 Console has a built-in Administrator account for owners.
The Settings menu is visible only to administrators and registered
service technicians. Changes made to these settings are saved to
the fitness equipment.
An Administrator uses a password (see below), and can access
the console settings so they can configure the console settings to
benefit their members and their facility.
To change system settings:
1. Press and hold Volume Down.
2. Press Channel in the following order:
Channel Up
Channel Down
Channel Down
Channel Up
2
3. Enter the password: 5 6 5 1 5 6 5
4. Touch OK. The System Settings banner
appears.
P82 CONSOLE
GETTING STARTED GUIDE
Personalized Networked Fitness Experience
Setting
About
Equipment
Use
System
Settings
Information
Displays serial number and event log
Gathers data on individual and cumulative equipment
use
Connectivity: Determines network type and IP address
Display: Customizes language, time zone, and date
format
TV settings: Sets up channels and close captions
Workout limits: Sets limits on equipment use during
peak hours, limit maximum treadmill speed, or choose
maximum pause time
Alerts: For networked equipment, a technician can
update software over the network. For non-networked
equipment, a technician uses a USB drive to update
each machine.
for your members