Precor P82 Getting Started Manual

Set up the console
The P82 Console has a built-in Administrator account for owners.
The Settings menu is visible only to administrators and registered
service technicians. Changes made to these settings are saved to the
fitness equipment.
An Administrator uses a password (see below) to access and
configure the console settings to enhance an exerciser's workout as
well as benefit the facility.
Change system settings
To change system settings:
1. Press and hold Volume Down.
2. Press Channel in the following order:
Channel Up
Channel Down
Channel Down
Channel Up
2
3. On the screen, enter the password:
5 6 5 1 5 6 5
4. Touch OK. The System Settings banner
appears.
For complete equipment operating instructions and troubleshooting, visit us at www.precor.com.
personalized fitness experience for your members
Welcome to a
P82 CONSOLE
GETTING STARTED GUIDE
System Information
About Displays serial number and event log
Equipment Use Shows data on equipment use
System Settings Connectivity: Determines network type (wired and Wi-
Fi) and configuration
Display: Customizes language, time zone, and date
format.
TV settings: Sets up channels and closed captions.
Workout limits: Sets limits on equipment use during
peak hours, limits maximum treadmill speed or
maximum pause time.
Manage Settings: Allows servicer to upload console,
network, and TV settings.