Precor P80 Operating And Maintaining page 33

Configuring the System Settings
Table 4. Active status light appearances and their meanings
Status light
appearance
Steady
(solid) blue
Pulsing blue The treadmill is due for
Steady
(solid)
yellow
Pulsing
yellow
Meaning
The treadmill is
operating normally and
does not currently
need maintenance.
scheduled
maintenance (P80
console only), or the
treadmill belt needs to
be replaced (except for
230 V models).
The treadmill has
detected and
recovered from an
error. It can still be
used, but some
functions may not be
available.
The treadmill has
detected an error, has
been unable to recover
from the error, and has
taken itself out of
service.
Action required
None.
Perform the needed
maintenance, then reset the
status light.
Refer to the console's event
log for more information.
Power-cycle the treadmill
(switch it off, wait 30
seconds, then switch it on
again). If the error occurs
again, check the console's
event log for more
information, then contact
Precor Customer Support.
31