Precor P82 Getting Started Manual

Welcome to a personalized fitness experience for your members.
The intuitive, high-definition touch screen, easy-to-reach single or dual motion controls, and built-in fitness tutorials make the P82
Console a unique fitness experience for your members and trainers.
Set Up the Console
The P82 Console has a built-in Administrator account for owners. The Settings menu is
visible only to administrators and registered service technicians. Changes made to
these settings are saved to the fitness equipment. An Administrator uses a password
(see below) to access and configure the console settings to enhance an exerciser's
workout as well as benefit the facility.
Change System Settings
1. Press and hold Volume Down.
2. Press Channel in the following order:
Channel Up
l
Channel Down
l
Channel Down
l
Channel Up
l
3. On the screen, enter the password: 5 6 5 1 5 6 5.
4. Touch OK. The System Settings banner appears.
For product tutorials, best-in-class training resources, and content libraries (select regions only) on www.precor.com/education.
.
©2020 Precor Incorporated PN 304010-104 Rev G NA ENU 15 September 2020
P82 Console
GETTING STARTED GUIDE
System
About
Equipment Use
System Settings
.
Information
Displays serial number and event log
Individual and cumulative equipment use data
Connectivity: Determines network type (Wired
and Wi-Fi) and IP address.
Display: Customizes language, time zone, and
date format.
TV settings: Sets up channels and close
captions.
Workout limits: Sets limits on equipment use
during peak hours, limits maximum treadmill
speed or maximum pause time. Alerts: For
networked equipment, a technician can update
software over the network. For non-networked
equipment, a technician uses a USB drive to
update each machine.