Assembly Instruction - York Fitness York Racer 3100 Instruction Manual

REMOVE ALL THE PARTS OF YOUR TREADMILL FORM THE CARTON AND
PLACE THEM ON THE FLOOR CAREFULLY!!
ASSEMBLING YOUR TREADMILL IS SIMPLE, PLEASE NOTE THAT THE
MAIN FRAME IS HEAVY; WE RECOMMEND THAT YOU GET SOMEONE TO
HELP YOU WHEN ATTACHING THE FRONT STABILIZER TO THE MAIN FRAME.
FOLLOW THESE INSTRUCTION CAREFULLY AND IT SHOULD TAKE YOU
AROUND 10-15 MINUTES.

ASSEMBLY INSTRUCTION

A
MAIN FRAME
B
HANDLE BAR
POST
* SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
HANDLE BAR
POST
FIXING
KNOB
POLYFOAM BLOCK
LOCK
PIN
FIXING
KNOB
GENERAL
ATTACH THE FRONT STABILIZER
NOTE: The main frame is heavy, you may
Raise the front of the treadmill and place a
polyfoam block (from the carton) underneath
the treadmill.
Loosen the two fixing knobs on both sides
of handle bar post.
Pull the lock pin on handle bar post then
raise the handle bar posts upright carefully
as shown.
Tighten the two fixing knobs to secure the
handle bar posts in position.
need someone to help you.
*