Assembly Instructions; Before You Start - York Fitness t501 Owner's Manual

assembly instructions

1. Before you start

1. Prepare your work area -
it is important you assemble
the product in a clean and
uncluttered space.
Handle bar
post x 2
Plastic Covers
Handle bar
cover
x 2
Part
No.
35
Fixings
15mm
Part
x 8
No. machine
82
screw
Flat
Part
x 8
No.
washer
97
Plastic
Part
No.
bolt
x 2
39
cap
!
This treadmill takes up
a floor space of 142cm x 42cm
and weighs 55 kg
6
2. Work with a friend -
we recommend you have
someone assist you with
the assembly as some of the
components are quite heavy.
Console
x 1
Cup holder
x 2
Part
No.
27
42mm
Part
x 4
No. allen head
79
bolt
Star
Part
x 12
No.
washer
109
3. Open the carton -
checking any warnings on
the carton and make sure you
have it the right way up.
Safety Key x 1
Cable Insert x 1
Part
No.
73
Tools and Consumables
Allen key /
screw driver
Part
No.
105
!
If you suspect you may have some parts missing, please contact
us before going back to your retailer. Refer to the Customer
Support section on page 5 for contact details.
4. Unpack the carton
a. Remove all the parts and
packaging from above the
treadmill and lay them out
on the floor
b. Flatten the sides of the
carton and remove the rest
of the packaging from
around the treadmill
c. Make sure you have
the following parts:
Power cable
x 1
Part Part
No. No.
107 51
Lubrication
Allen key
oil
Part Part
No. No.
106 110