L-Band Modulator + 10Mhz ( Option ) - Adtec EN-91 User Manual

- Satellite Modulation software key, requires factory installed DVBS/S2 hardware

L-Band Modulator + 10MHz ( option )

Requires factory installation
Modulation Scheme Support: QPSK / 8PSK / 16APSK / 32APSK*
Interface Rate: 50 kbit/s- 216 Mb/s (FEC-& interface dependent)
Baudrate range: 0.06-45/68 Mbaud
Selectable baseband shaping : 20%, 25%, 35%
DVB-S2 compliant per EN 302307
DVB-S compliant per EN 300421
DVB-DSNG compliant per EN301210
Output level: -35 to +5dBm (+/- 2dB)
Frequency: 950 to 2150MHz
10MHz Option: Adds option to add 10MHz onto L-Band output
Connector: Two BNC (50Ohm)**
* software keys are required to unlock full hardware support. Base modulator supports DVB-S QPSK
15 Mbaud.
**MAIN BNC: L-Band Frequency (950-2150MHz), MONITOR BNC: Fixed Power Level -45dBm
DVBS- 30Mbps (Software Option)
- Satellite Modulation software key, requires factory installed DVBS/S2 hardware
DVBS2-8PSK (Software Option)
- Satellite Modulation software key, requires factory installed DVBS/S2 hardware
DVBS2-16APSK (Software Option)
- Satellite Modulation software key, requires factory installed DVBS/S2 hardware
DVBS2-32APSK (Software Option)
- Satellite Modulation software key, requires factory installed DVBS/S2 hardware