Adtec EN-91 User Manual page 16

Tables Allows the operator to choose which type of
Tables the encoder will generate.
DVB - includes PMT, PAT, NIT and SDT tables
MPEG - includes PAT and PMT tables
ATSC - includes PAT, PMT, VCT, RRT, MGT,
and STT tables
Splice PID Adds PID (configured in PID menu) to
Active transport stream for carriage of SCTE 35
messages. This option is used in combination
with DVC files or the GPIO port for SCTE 35
payload generation.
ASI Routes a external ASI signal from the HD/SDI
Receive input in the place of the internally encoded
Mode signal.
ASI Mode Configures the ASI output ports transmit
mode.
When set to Continuous, Data is transmitted
at the configured TMR rate continuously
regardless of whether or not there is a valid
video source.
When set to Encode only, data will only be
transmitted if there is a valid video source.
Data will not be transmitted if the encoder is
idling.
Carrier ID Carrier ID contains unique information within
Menu the transport stream to aid in identifying and
troubleshooting satellite sources. Specified by
SUIRG and endorsed by the WBU-ISOG, the
user will need to complete some fields. The
Encoder Manufacturer and Encoder Serial
Number fields will automatically be filled.
Bars, Bars, Tones and Service ID information can
Tones, ID be overlayed on top of valid video by
Menu selecting the desired combination from this
menu.
DVB
ATSC
MPEG
NO
YES
ON
OFF
CONTINUOUS
ENCODEONLY
Provider ID: 5 characters.
Phone: 17 Character number
( typically operator
MCR/POC number. '+','(',
and ')'.
Longitude: 9 Characters
('+000.0000' to '+/-
180.0000')
Latitude: 8 Characters
('+00.0000' to '+/-90.0000')
User Information: 15
characters.
Bars Mode: ON, OFF
Bars Type: BARS, Solid
color, FLASH
Tones Mode: ON, OFF
OSD Mode: ON, OFF, BLINK