Pids Menu - Adtec EN-91 User Manual

PIDs Menu

Item Function
Transport Sets the Transport Stream ID in PAT and other
Stream ID tables in the egress transport stream.
Configure this value in Hex.
PMT PID PMT PID refers to the PID of the Program Map Table
(PMT). Program Map Tables are used to describe
the properties of a single program.
PCR PID Programs periodically provide a Program Clock
Reference, or PCR, on one of the PIDs in the
program. This is also known as the master clock.
The PCR PID identifies the packets which contain
PCR adaptation fields.
Video PID Video PID identifies packets containing the video
Packetized Elementary Stream data.
Audio PID Identify packets containing audio content for the
1-8 specified channels
Teletext PID Teletext PID identify packets containing teletext
information.
VITC PID Sets the Program ID (PID) for the ANC (H & V).
ANC Data captured from HD-SDI source is carried
per SMPTE-2038. Typically this is used to carry
VITC. If VITC and LTC are carried concurrently, LTC
is dropped.
AMOL PID Automated Measurement of Line Ups; identifies
packet which contains AMOL (NTSC) information
Only applies to 525 line (NTSC) video.
Splice PID Splice PID is used for Cable Labs SCTE 35 Splice
Point identification.
Options
0x0001 - 0x1FFE
user-defined using
the numeric keypad
user-defined using
the numeric keypad
user-defined using
the numeric keypad
user-defined using
the numeric keypad
user-defined using
the numeric keypad
user-defined using
the numeric keypad
user-defined using
the numeric keypad
user-defined using
the numeric keypad