Adtec EN-91 User Manual page 42

*.sysd version select "copied new firmware version"
Once you press enter, this will reboot your device into the new version.
See series of commands as they occur during this process below.
Last login: Wed Sep 14 12:08:53 on ttys000
Macintosh:~ user$ telnet 192.168.10.143
Trying 192.168.10.143...
Connected to 192.168.10.143.
Escape character is '^]'.
Adtec Resident Telnet Server...
UserName:
adtec
PassWord:
User adtec connected
*.sysd version search
OK
/media/hd0/media/EN-80-v1.03.09_RC.nfcms.tgz
*.sysd version extract /media/hd0/media/EN-80-v1.03.09_RC.nfcms.tgz
OK
Validating Firmware: EN-80-v1.03.09_RC.nfcms.tgz
Firmware file validated.
Extracting firmware: EN-80-v1.03.09_RC.nfcms.tgz.
------ long series of extraction messages -----
Extraction complete.
Moved usr/adtec/EN-80 to /opt/pkg
Extraction successful.
*.sysd version
OK
adtec/EN-80/1.03.10 (*** current selection ***)
adtec/EN-80/1.02.17
adtec/EN-80/1.03.09_RC
*.sysd version select adtec/EN-80/1.03.09_RC
OK
Found Required GNU for adtec/EN-80/1.03.09_RC: gcc-3.4.4-glibc-2.3.5
Updating OEM version to adtec/EN-80/1.03.09_RC.
Updating GNU to gcc-3.4.4-glibc-2.3.5
Updated GNU to gcc-3.4.4-glibc-2.3.5