Bake Burner And Ignitor - Iq Touch Models - Electrolux EW30GF65G Series Product & Training Manual

UPPER OVEN COMPONENTS

Bake Burner and Ignitor - IQ Touch Models

To remove and replace the bake burner begin by
Photo A
Access Plate
disconnecting the bake burner ignitor harness.
The harness is accessed by removing the small
access plate that the power cord and strain relief are
attached to at the rear of the range (Photo A), or from
below by removing the warmer drawer. (Photo B)
Photo B
Next remove the oven door and all interior oven
Photo C
racks. Remove the rack sensor assembly by taking
out the two screws in the top mounting bracket and
Mtg. screws
lifting the bracket and sensor assembly rod out of the
lower bracket. (Photo C)
Remove the two screws that secure the convection
Photo D
fan cover to the rear of the oven wall and remove the
cover. (Photo D)
Page 38