To remove the cooktop for service first
remove the grates, burner caps and burners
as seen in photo A.
Using a ¼" socket wrench or nut driver
remove the mounting screws at each burner
orifice assembly.
Insert a putty knife or similar tool between
the main top and manifold panel near the
outside of the front corner. Push the putty
knife toward the rear to release the maintop
mounting clip (Photo B). Repeat for both
sides.
When the mounting clips are released the
front edge of the cooktop can be lifted. Make
sure that the orifice assemblies do not bind
in the cutouts in the cooktop when raising the
top to remove it from the range. (Photo C)
Lift the front of the cooktop and pull forward
to disengage the back edge from the rear
hinge brackets on each side of the range. The
cooktop can then be lifted clear of the range.
(Photo D)
Rear Hinge Bracket
Cooktop Removal - IQ Touch Models
Page 31
Orifice Holder Assembly
Mounting Screws
Mounting Clip
Photo A
Photo B
Photo C
Photo D