Lower oven Chassis
The lower oven chassis can be removed as an
entire assembly. Begin by disconnecting the wire
harness connections to the element , cavity light,
and temperature probe.
Screw Access
Remove the drawer per instructions on page 43.
Using a ¼" nut driver with magnetic screw holder
remove the two screws securing the lower oven
chassis to the range chassis.
These screws are accessed through the holes in
the lower oven cavity liner just below the drawer
glide rail. (Photo A).
Photo A
The lower oven chassis can now be pulled forward
and removed from the range. (Photo B).
With the lower oven chassis removed the
insulation and chassis panels can be serviced.
NOTE: The lower oven chassis is not available as a
complete replacement assembly.
Lower Oven
Chassis
Photo B
Assembly
Page 46