Amana AXP Series Service Training Manual page 66

Cooling Fan
Screen
SER SE SERVICE MODE R VI VIC C E E MO MOD
0 08 0 8 8
Cooling Fan Co Cool olin ing g Fa Fan
0. 0.0 0.0 AMPS 0 AM AMPS
Antenna Motors
Screen
SER SERVICE MODE SE R VI VIC C E E MOD MO
0 09 0 9 9
Antenna Motors Ante tenn An nna a
0.0 AMPS 0. 0.0 0 AMPS AM
This screen will allow operation of the
cooling fan and show the number of amps
being drawn.
D E E
n
next Service Mode Test.
PS
previous Service Mode Test. previous
RANGE: Under normal operation, the
(It may not read amps)
This screen will allow operation of the
antenna motors and show the
number number of amps being drawn.
D E E
Moto tors Mo rs
PS
Press this pad to go to the
Press this pad to go to the
This pad will turn the fan on.
This pad will turn the fan off.
Press this pad repeatedly
to exit Service Mode .
amp draw should be 0.9 - 2.5 amps.
Press this pad to go to the
next Service Mode Test.
Press this pad to go to the
previous previous Service Mode Test.
This pad will turn the antenna motors on.
This pad will turn the antenna motors off.
Press this pad repeatedly
to exit Service Mode.
RANGE: Under normal operation, the RANGE:
amp draw may be to low to read.
9
10