Learning - AT&T U-verse User Manual

Advanced Features Setup
B. Using the Search Function, cont.
3. Release both keys, all of the mode keys will flash then the selected mode key light will
stay lit.
4. Press the power button repetitively until the selected device turns off. Once your device
has turned off, press OK to save the code.
5. To indicate a successful setup, the selected mode key will turn off and you are ready to
setup another device by following steps 1 thru 4 of this section.
C. Learning
If the code for your device is not found in the code list and the search feature was not
able to find the code for your device, then the learning feature may be your best option.
The learning feature lets you "learn" functions from your original remote control.
Note: Learning cannot be performed for any mode until after that mode is setup with a
valid code. So, to learn the keys, first setup the mode with a valid code, see page 10,
(select any code for the appropriate mode, from the code list on page 29 and 30), then
follow the steps on the following page.
12
Advanced Features Setup
C-I. Learning Commands
1. Press and hold the mode key (TV, DVD, or AUX) on the U-verse
remote and while holding it pressed, press the LEARN key for
one second then release both keys.
2. All of the mode keys will flash and then the selected mode key
light remains on.
3. On your U-verse remote, press and release the key that you
want to teach.
4. While pointing your original remote at the bottom of your AT&T
U-verse TV Easy Find Remote Control, approximately 1 inch
apart, press and hold the original remote key until the mode
key light blinks once and stays on. (If there is a learning
problem, the mode key light blinks for three seconds and stays
on. If this happens, repeat steps 3 and 4 above.)
5. Repeat steps 3 and 4 above for each key you want your AT&T
U-verse TV Easy Find Remote Control to learn.
Press and release the LEARN key when all desired remote
commands have been learned. If you have encountered
difficulties with the LEARN key setup, please refer to Section M:
Troubleshooting Learning.
AT&T
remote
1 inch
apart
Your
original
remote
13