Backlight Cancellation; Resetting The Remote Control; Finding More Than One Remote - AT&T U-verse User Manual

Advanced Features Setup
J. Backlight Cancellation Feature
Your AT&T U-verse TV Easy Find Remote Control
the backlights on or off. If you wish to use this feature, follow these instructions.
1. Press and hold the TV key and while holding it pressed, press the OK key for one
second and release both keys at the same time.
2. All the mode keys flash and the TV mode key light stays on.
3. Press the GUIDE key, all backlights will no longer turn on.
To reverse this process so that the backlights turn on when the remote control is being
used, simply follow the same steps of the above section one more time.
K. Resetting the Remote Control to the Factory Default Settings
1. Press and hold the TV key and while holding it pressed, press the OK key for one
second and release both keys at the same time.
2. All the mode keys will flash, the TV mode key light will stay on.
22
has the ability to toggle between turning
Advanced Features Setup
3. Press and hold the DELETE key for 3 seconds until the TV mode key blinks and stays
off. The remote control is now reset to factory default settings. If you want to use the
remote control for your TV and other devices, you will need to setup the TV, DVD and
AUX mode keys.
4. If no key is pressed within 30 seconds, the remote control times out. The selected
mode key light flashes for 3 seconds and turns off. The remote control returns to
normal operation and you will need to start over.
L. Finding More Than One Remote
If you own more than one AT&T U-verse TV Easy Find Remote Control and Base Station,
you can set each Base Station to find only its own remote with 16 unique codes. With the
first power up of the Base Station, it will be set to find ALL remotes.
To set the Base Station so that it finds a specific remote when there are multiple remote
in the household, follow the instructions on the following page:
23