Advanced Features Setup; Programming The Remote - AT&T U-verse User Manual

Quick Setup Guide
5. How to use the Find Feature
STEP 1. If you have misplaced the remote control, simply press
the AT&T globe labeled FIND on the Base Station.
sound and flash to make it easy to find your misplaced remote
control.
STEP 2. Once you have located the remote control, press any key
on the remote to stop the sound and flashing keys.
AT&T globe
(Find key)
8
The remote will

Advanced Features Setup

Controlling Other Devices
In order to control other devices with your AT&T U-verse TV Easy Find Remote Control,
you need to tell the remote control what types of devices you have. Sections A and B take
you through the steps needed to do this. The volume controls will control your AT&T U-
verse receiver until the TV device mode is programmed. The channel controls will always
control your AT&T U-verse receiver. If you want to change this, you should follow the steps
in Sections E & F.
Programming the remote to control other devices
To use your AT&T U-verse TV Easy Find Remote Control for your other devices, you will
need to setup the TV, DVD and AUX mode keys to control the devices (Section A).
Please refer to the code list for a list of supported brands and models. If you do not find
the brand of your device on the supported code list, please refer to section B for the
search function or you may use section C for instructions on the learning feature of your
remote control.
9