Operation And Maintenance - Fujitsu ETERNUS DX200F Setup Manual

Operation and Maintenance

Status check
The status of the ETERNUS DX should be regularly monitored by checking the LEDs and using ETERNUS Web GUI.
Data backup
Important data should be regularly backed up to a tape drive or similar device as a precaution against system failures.
Maintenance support period
The standard maintenance support period for ETERNUS DX is five years from the date of purchase, or is defined in your service
level agreement (SLA). Contact your sales representative for details if you prefer to extend the period.
Operation Guide (Basic)
FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide
Copyright 2014 FUJITSU LIMITED
FUJITSU Storage ETERNUS DX200F All Flash Array
Issuance responsibility: FUJITSU LIMITED
• The content of this manual is subject to change without notice.
• This manual was prepared with the utmost attention to detail.
However, Fujitsu shall assume no responsibility for any operational
problems as the result of errors, omissions, or the use of
information in this manual.
• Fujitsu assumes no liability for damages to third party copyrights
or other rights arising from the use of any information in this
manual.
• The content of this manual may not be reproduced or distributed in
part or in its entirety without prior permission from Fujitsu.
9
Setup Guide
P3AM-8482-01ENZ0
Date of issuance: May 2014
P3AM-8482-01ENZ0