Flat Surface Installation - 3Com 8250 User Manual

3
Leave at least 13 cm (5 in.) length.
Ethernet cable may be routed through
center opening or through the side.
F S
LAT URFACE
The access point can also be placed on a flat surface such as a table, desktop or
filing cabinet. Do not install the access point on any type of metal surface. If you
choose a flat surface mount, select a location that is clear of obstructions and
provides good reception.
Note: Regulatory restrictions dictate that when this device is operational, the
minimal body-to-antenna distance is 1 Meter (3 Feet).
Position the access point at an angle to the mounting plate bayonet
connection and turn the unit clockwise until it snaps into place, as shown
below.
Side opening
I
NSTALLATION
Connect
Ethernet cable.
Hold the access point at an angle. Turn
clockwise to engage and secure it on
the mounting plate.
Center
opening
24
Hook for securing
the cable
Rotate for
best reception.