Web Servers; Smart Monitor - 3Com 8250 User Manual

Wireless lan access points
Hide thumbs Also See for 8250:
Table of Contents

Advertisement

W
S
EB
ERVERS
This option controls whether the web management interface is enabled. There
are two protocols available for web server connection:
HTTP—Sends data unencrypted over the network.
HTTPS—Uses Secure Socket Layer (SSL) technology to encrypt information
between the access point and the web browser.
By default, both protocols are enabled.
Note: To make a secure connection to the access point using HTTPS, you must
specify
https://
configuration.
HTTP Server—Enable or disable the HTTP protocol, allowing connection to
the access point management interface using unencrypted HTTP.
HTTP Port—If HTTP Server is enabled, enter the HTTP port number. This
parameter determines the port number where the web server accepts HTTP
connections. The default is 80. If you enter a number other than 80, you must
also specify the port number in the browser window address pane (for
example,
http://ipaddress:portnumber
1024 and 65535.
HTTPS Server—Enable or disable the HTTPS protocol, allowing connection to
the access point management interface using encrypted HTTPS.
HTTPS Port—If HTTPS Server is enabled, enter the HTTPS port number. This
parameter determines the port number where the web server accepts HTTPS
connections. The default is 443. If you enter a number other than 443, you
must also specify the port number in the browser window address pane (for
example, https://ipaddress:portnumber). This number can be set between
1024 and 65535.
S
M
MART
ONITOR
When Smart Monitor is enabled, the access point actively monitors its Ethernet
link to determine if it can provide network service to wireless clients.
If the Ethernet link is down (for example, the cable is unplugged), the access point
shuts down all radios and denies any wireless connections until the Ethernet link
is re-established.
Optionally, the access point may be configured to PING a target on the network
to validate the Ethernet link.
in the browser window address pane when launching the
34
). This number can be set between

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents