Wpa Configuration For Windows Xp - 3Com 8250 User Manual

8
WPA C
ONFIGURATION FOR
The following table shows how to configure the access point to support the
various authentication and encryption options available for Windows XP Wireless
Zero Configuration.
The following notes apply to configuring the access point for WPA under
Windows XP:
Authentication Encryption Authentication Encryption
h Click on Apply.
The access point is now configured for WPA Pre-shared Key.
A WPA-capable wireless network interface card is required.
The Windows XP Support Patch for Wireless Protected Access, which you can
download from the Microsoft Web site, is required.
To allow WEP clients, clear the WPA Configuration Required check box and
enter an appropriate WEP key.
For all WPA configurations, 802.1x must be enabled on the
Authentication page.
Windows XP Wireless Zero
Configuration
Disabled
Open
WEP
Disabled
Shared
WEP
W XP
INDOWS
Access Points 8250/8750
Open System
Open System
Not available
Shared Key
64
Other
Disable
Enter static keys
Enable under WEP
Configuration
Enter static keys
Enable under WEP
Configuration