Using The Ir Receiver - HP LD4235 User Manual

Item Screen marks
(2) INPUT
MENU
AUTO/SET

Using the IR receiver

This allows a remote control sensor to be placed in a custom location.
NOTE: The IR receiver is made with a magnet. If it is attached to the side or the bottom of the product,
external shocks may cause the IR receiver to fall. It is recommended to attach it to the back of the product.
6 Chapter 3 Assembling and preparing
Description
Changes the input source.
Accesses the main menus, or saves your input and exits the menus.
Moves the selection up and down.
Adjusts the volume level.
Displays the current signal and mode. Press this button to adjust the screen automatically (RGB mode
only).
Turns the power on or off.