On Timer Input (Command: F U) - HP LD4235 User Manual

27. On Timer Input (Command: f u)

To select an external input for the current On Time setting and add a new schedule or change the existing
schedule.
Transmission
[f][u][ ][Set ID][ ][Data1][Cr]
[f][u][ ][Set ID][ ][Data1][Data2][Cr]
Data (Add schedule)
20: Input (AV)
40: Component
60. RGB
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
Data1 (Change schedule)
1. f1h to f4h (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2
20: Input (AV)
40: Component
60. RGB
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
* To read the schedule input, enter FFH for [Data2].
(Example 1: fu 01 60 - Move each schedule input down one row and save the 1st schedule input in RGB
mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule input.)
(Example 3: fu 01 f3 20 - Change the 3rd data schedule input to the current On Time and AV input.)
* This function is supported only when 1 (Year/Month/ Day), 2 (Hour/Minute/Second), On Time (Repeat Mode/
Time) are set.
Transmission / Receiving protocol 91