Time Settings - HP LD4235 User Manual

TIME settings

1. Press MENU to access the main menus.
2. Press the Navigation buttons to scroll to TIME and press OK.
3. Press the Navigation buttons to scroll to the setting or option you want and press OK.
To return to the previous level, press BACK.
4. When you are finished, press EXIT. When you return to the previous menu, press BACK.
The available time settings are as follows:
Setting
Clock
On/Off Timer
Sleep Timer
Power On Delay
Auto off
Automatic Standby
NOTE: Off Time/ On Time can be saved for up to seven schedules; the display is turned on or off at the
preset time in the schedule list. If multiple preset times are stored in the schedule list, this function works at
the nearest time from the current time.
Once the on or off time is set, these functions operate daily at the preset time.
The scheduled power-on and power-off functions work properly only when the device time is set correctly.
When the scheduled power-on and power-off times are the same, the power-off time has priority over the
power-on time if the set is turned on, and vice versa if the set is turned off.
32 Chapter 6 Customizing settings
Description
Sets the time feature.
Sets the time to turn on or off the display.
Sets the length of time until the display turns off. When you turn the display off and turn it on again,
the Sleep Timer will be set to off.
When connecting multiple displays and turning the power on, the displays are turned on individually to
prevent overload.
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
If you do not use the display for more than 4 hours, it will be in standby mode automatically.