Updating A User - Honeywell MAXPRO NVR XE Operator's Manual

10.
11.
12.
13.
14.
U
You can modify the settings of a user to change the user ID, password, role, description,
IsWindowsUser flag, and e-mail address. You can update user settings only if you have admin
rights.
To update a user
1.
2.
3.
4.
5.
MAXPRO NVR Operator's Guide
Click the Camera Association tab to associate cameras to the user.
• To associate one camera at a time, under Available List, select a camera and then
click >. The selected camera appears under Associated List.
• Click >> to associate all cameras to Associated List.
• To remove an associated camera, under Associated List, select a camera and then
click <. The selected camera appears under Available List.
• Click << to disassociate all the cameras to Available List.
Click the Recorder Event Association tab to associate recorder events to the user.
• To associate one particular event, under Available List, select the check box
corresponding to the event and then click >. The select recorder event appears
under Associated List.
• Click >> to associate all events to Associated List.
• To remove an event, under Associated List, select a check box corresponding to
the event and then click <. The selected event appears under Available List.
• Click << to disassociate all the events to Available List.
Click the Input Event Association tab to associate input events to the user.
• To associate one particular input event, under Available List, select the check box
corresponding to the input event and then click >. The selected input event appears
under Associated List.
• Click >> to associate all the input events to Associated List.
• To remove an input event, under Associated List, select a check box corresponding
to the input event and then click <. The selected input event appears under
Available List.
• Click << to disassociate all the input events to Available List.
Click the Camera Event Association tab to associate camera events to the user.
• To associate one particular event, under Available List, select the check box
corresponding to the event and then click >. The select camera event appears under
Associated List.
• Click >> to associate all the camera events to Associated List.
• To remove an event, under Associated List, select a check box corresponding to
the event and then click <. The selected camera event appears under Available
List.
• Click << to disassociate all the camera events to Available List.
Click Save to save the information.
Note:
You can add a maximum of 10 users in MAXPRO NVR.
PDATING A USER
Click the Configurator tab. The System page displays by default.
Click the User tab to navigate to the User page.
Select the check box corresponding to the user you want to modify.
Change the settings such as user name, user description, and so on.
Click Save.
C O N F I G U R I N G M A X P R O N V R
47