Honeywell MAXPRO NVR XE Operator's Manual page 36

C O N F I G U R I N G M A X P R O N V R
3
Note:
EVENT RECORDI NG SETTINGS
The event recording settings enable configuring of the times associated to video motion
detection and user based recording.
2.
EMAIL SETTINGS
The email settings enable configuring of the SMTP server settings for email communication of
events.
3.
Note:
Note:
HOLIDAYS/EXCEPTIONS SETTI NGS
The holidays/exceptions settings enable setting of the holiday and exceptions for schedule
based video recording.
4.
36
The information in the Device Address and the Device Name field is mandatory.
Under Event Recording Settings
• The Pre-event Time (the length of time (in seconds) recording takes place before
motion is detected) and displays by default. Select a new Pre-event Time as
applicable.
• The Record for (the length of time (in seconds) recording takes place after motion is
detected) displays by default. Select a new Record for Time as applicable.
• The User based Recording Time (duration for which the recording is done after the
user action) displays by default. Select a new User based Recording Time as
applicable.
Under Email Settings
• Type the SMTP Server Name.
• The Port displays by default. Type a new Port number as applicable.
• Type the User Name of the user.
• Type the Password of the user.
Select the Use Default Credentials check box if you want to use the credentials
that are used while logging on.
Select the Stop Email Service check box, if you do not want to send an e-mail
from the configured settings.
Under Holidays/Exceptions
To set holidays and exceptions
• Select a day from the calendar, and click Set as Holiday to set the selected day
as holiday. The selected holiday displays under List of Holidays.
• Select a day from the calendar, and click Set as Exception to set the selected
day as exception. The selected exception displays under List of Exceptions.
MAXPRO NVR Operator's Guide