Context Menu Options - Honeywell MAXPRO NVR XE Operator's Manual

M O N I T O R I N G A S I T E
4
Alarms
If you have selected multiple alarms, then all the alarms are cleared.
To clear all the acknowledged alarms
•
C
ONTEXT MENU OPTIONS
When you right-click on the list of acknowledged alarms in the second table, a context menu
appears. The following table lists the commands in the context menu:
68
Click Clear All. All the acknowledged alarms are cleared and removed from the list of
acknowledged alarms.
Command
Clear
Clear All
Show Video
Show Preview Pane
Show Details
Freeze
Clear on Ack
Receive Alarms Only
Receive Events Only
Click to....
clear the selected acknowledged alarm.
clear all the acknowledged alarms.
view video from the time corresponding to
the occurrence of the event that triggered the
alarm. The video is played in the currently
selected panel in the salvo layout.
Note:
The video is played only when the
video recording is available.
view video related to the alarm in a four panel
salvo layout. See Setting preferences
page 30 for more information.
view the details of the alarm. This feature lists
the device from which the alarm was
triggered, description, date time when the
alarm was triggered, status of the alarm,
global event ID, and the event attribute
associated to the alarm. You can also use the
previous and next buttons to view the details
of the alarms listed in the alarms window.
stop receiving the new or unacknowledged
alarms in the Alarm window. You can click
this command again to start receiving the
alarms. This feature is useful when the Alarm
window contains many unacknowledged
alarms and it becomes difficult to mange
them. You can stop receiving the alarms
momentarily and start receiving again when
needed.
automatically clear the alarms when they are
acknowledged.
list only the alarms in the Alarm window.
Alarms are listed only when the severity level
of the corresponding event that triggered the
alarm is greater than or equal to the alarm
severity threshold value. See
preferences on page 30 for more information.
list only the events in the Alarm window.
Events whose severity level is greater than or
equal to the alarm severity threshold value
are listed. See Setting preferences
30 for more information.
MAXPRO NVR Operator's Guide
on
Setting
on page