Original Setting - Konica Minolta bizhub C652 User Manual

5.2

Original Setting

5.2 Original Setting
Configure the original status or original direction for outputting desired copies.
%
Settings
Mixed Original
Z-Folded Original
Original Size
Binding Position
Original Direction
Despeckle
bizhub C652/C652DS/C552/C552DS/C452
Downloaded From ManualsPrinter.com Manuals
Press [Original Setting].
Loads originals of different sizes into the ADF and scan them at a time.
Correctly detects the original size when folded originals are loaded into the
ADF and copied.
Select [Auto] to detect the size of the original automatically.
If the size of the original is not automatically detected, select the original
size.
Custom Size
Photo Size
Specify the original binding position (page margin) to prevent the copy
from being printed upside-down when scanning a 2-sided original,
Auto
Specify the original direction to load into the ADF or place on the original
glass when copying 2-sided originals or making 2-sided or combined cop-
ies.
Reduces the influence of a dirt of the slit glass upon a copy output when
loading an original in the ADF.
Enter the original size.
Select the photo size.
Automatically configures the binding position of
the original.
• A binding margin along the long side of the
paper is selected if the original length is 11-
11/16 inch (297 mm) or less.
• If the original length is more than 11-11/16
inch (297 mm), a binding margin along the
short side of the paper is selected.
5
5-15