Konica Minolta bizhub C652 User Manual page 230

9.2 Troubleshooting table
Message
Replenish paper.
Toner (X) is low. Please when in-
dicate.
Install toner cartridge (X)
Toner is depleted
Replace the toner cartridge fol-
lowing the guidance (explana-
tion).
Press the [Continue] button to
continue the operations.
No more staples.
Replace the staple cartridge, or
cancel stapling
Misfeed detected. Remove pa-
per according to the instruc-
tions.
Empty hole-punch scrap box
To continue the job, disable
punching.
Reset the following number of
originals.
XX
An internal error occurred. Open
and then close the front door. If
the trouble code appears again,
contact your Service Rep.
An internal error occurred. Turn
the main switch OFF and ON. If
the trouble code appears again,
contact your Service Rep.
Malfunction detected.
Inform the service representa-
tive of the error code.
Clean the slit scan glass on the
far left with a glass cleaner.
Continuing using the machine in
this condition may cause lines to
appear in the output.
Clean the slit glass on the left
side of the machine with the
glass cleaner. Continuing using
the machine in this condition
may cause lines to appear in the
output.
Clean the slit glass on the left
side of the ADF with the glass
cleaner. Continuing using the
machine in this condition may
cause lines to appear in the out-
put.
bizhub C652/C652DS/C552/C552DS/C452
Downloaded From ManualsPrinter.com Manuals
Cause
The indicated tray has run out of
paper.
The toner for the indicated color
is about to run out.
The toner is about to run out.
Toner is depleted
The staples have run out.
Since a paper jam occurred, the
machine is unable to make cop-
ies.
(1) The punch scrap box is full.
(2) The punch scrap box is not in-
stalled.
After clearing a paper jam, it is
necessary to reload certain pag-
es of the original that have al-
ready been fed through the ADF.
The machine malfunctioned and
is unable to make copies.
The machine malfunctioned and
is unable to make copies.
The slit glass is dirty.
The slit glass (front) is dirty.
The slit glass (back) is dirty.
Remedy
Add paper. (p. 8-3)
Prepare to replace the toner car-
tridge following the guidance
contained in your maintenance
agreement.
Replace the toner cartridge fol-
lowing the guidance contained in
your maintenance agreement.
Replace the toner cartridge fol-
lowing the guidance contained in
your maintenance agreement.
Replace the staple cartridge.
Clear the jammed paper.
(1) Throw punch scraps away
from the punch scrap box.
(2) Install the punch scrap box.
Load the indicated original pages
into the ADF.
Take a remedy according to the
message displayed in the
screen. If the problem is not re-
solved or released, inform your
service representative of the
malfunction code displayed in
the screen.
Inform your service representa-
tive of the code displayed in the
screen.
User the slit glass cleaner to
clean it.
User the slit glass cleaner to
clean it.
User the slit glass cleaner to
clean it.
9
9-9