Copier Settings - Konica Minolta bizhub C652 User Manual

7.6

Copier Settings

7.6 Copier Settings
Configure the settings used by the copy functions.
%
Settings
Auto Zoom (Platen)
Auto Zoom (ADF)
Specify Default Tray when
APS Off
Select Tray for Insert Sheet
Print Jobs During Copy
Operation
Tri-Fold Print Side
Automatic Image Rotation
Copy Card Settings
Factory default
Auto Zoom (Platen)
Auto Zoom (ADF)
bizhub C652/C652DS/C552/C552DS/C452
Downloaded From ManualsPrinter.com Manuals
Press the [Utility/Counter] key ö [Administrator Settings] ö [Copier Settings].
Configure whether Auto Select is automatically selected when a paper tray
is selected manually while an original is placed on the original glass.
Configure whether Auto Select is automatically selected when a paper tray
is selected manually while an original is placed in the ADF.
Configure which paper tray to be selected when the APS (Auto Paper) set-
ting is canceled.
Tray Before APS ON
Default Tray
Configure the default paper tray loaded with paper for the cover pages
(front cover), inserted sheets and the chapter title pages.
Configure whether to accept print data or fax data while a copy operation
is being performed.
Accept
Receive Only
Configure whether the printed side is on the inside or the outside when the
page is folded in three.
This function is enabled when the finisher FS-526 and Saddle Sticher SD-
508 are installed.
When the original orientation is different from paper orientation, the image
is rotated depending on the setting. Configure when the image is automat-
ically rotated.
Register card copy setting.
If [Card Copy] is selected in [Application], the function can be invoked with
the registered setting.
Layout
Zoom
Store Original Size
OFF
ON
Uses the paper tray specified before the APS was
selected.
Uses Tray 1.
Accepts print data or fax data to print.
Prints print data or fax data after the copy opera-
tion is finished.
Specify where to place the front and back sides
of a card.
Specify to copy a card with the full size or enlarge
an image to fit paper.
Change and register the pre-specified original
size or [Original Name].
7
7-43