Part 2: Test Network Connectivity - Chauvet Nexus Aw 7x7 User Manual

Operation
Part 2: Test
Network
Connectivity
-24-
Select the Output dropdown icon from the tool bar at the top of the Kling-Net Mapper screen.
One of the options will be Test Pattern.
1. Select Test Pattern. The image to the right of the icon is a small screen, indicating that
Test Pattern is the current mode.
2. Select the icon to the right of the Output dropdown icon. One of the options will be
Flashing Output Selection.
3. Select Flashing Output Selection. The icon is a faded green square with an arrow,
indicating that a flashing green light is the current test pattern.
4. Left click once on an LED display product. The product flashes green.
5. Repeat step 8 for every product in the list.
Nexus Aw 7x7
Nexus™ Aw 7x7 User Manual Rev. 1