Chauvet Nexus Aw 7x7 User Manual page 29

1. Select the desired network the product is connected to.
If you are running a hard-wired line from the PC to your
router, then select Local Area Connection. The Local Area
Connection Status dialog appears.
2. Click Properties. The Local Area Connection Properties
dialog appears.
1. From the Networking tab, select Internet Protocol Version 4
(TCP/IPv4).
2. Click Properties. The Internet Protocol Version 4
(TCP/IPv4) Properties dialog appears.
1. From the General tab, select Use the following IP address:.
2. Enter the following information:
3. Enter 2.255.0.0 in the IP address box.
4. Enter 255.0.0.0 in the Subnet mask box.
5. Click OK.
6. Close existing dialogs that are currently open.
7. Minimize the Control Panel, as it will be necessary to
access this window after the software upgrade is uploaded
to the product.
1. From the Nexus™ Aw 7x7 control panel, navigate to the
Info main level.
2. Select IP Address.
3. From the PC, open the Internet browser.
4. Enter the IP address for the Nexus™ Aw 7x7 you are
working with in the address bar. For example, if the IP
address shown in the product's control panel is
2.34.58.104, then type that into your internet browser
address bar).
5. Press ENTER. The Authentication Required dialog
appears.
Nexus™ Aw 7x7 User Manual Rev. 1
Step 5:
Step 6:
Step 7:
Step 8:
Operation
-27-