Back Of The Switch; Power Connector - HP ProCurve Switch 1600M Installation Manual

Introducing the HP ProCurve Switch 1600M and 2400M

Back of the Switch

Back of the Switch
.

Power Connector

The Switch 1600M and 2400M do not have a power switch; they are powered
on when connected to an active AC power source. The switches automatically
adjust to any voltage between 100-127 and 200-240 volts and either 50 or 60
Hz. There are no voltage range settings required.
1-6
AC power connector
cooling vent - make sure this is not
obstructed for proper switch operation