Cables and Connectors
Fiber-Optic Cables
Fiber-Optic Cables
10Base-FL Ports
Fiber-optic cables connected to the ports on the 10Base-FL Switch Module
that can be installed in the Switch 1600M must be 850 nm wavelength,
multimode cable conforming to the ISO/IEC 793-2 type B1, and ITU-T G.652
standards, and the cables must have ST-type connectors.
100Base-FX Ports
Fiber-optic cables connected to the ports on the 100Base-FX Switch Module
that can be installed in the Switch 1600M must be 1300 nm wavelength,
multimode cable conforming to the ISO/IEC 793-2 type B1, and ITU-T G.652
standards, and the cables must have SC-type connectors.
Gigabit-SX Ports
Fiber-optic cables connected to the port on the Gigabit-SX Switch Module that
can be installed in the Switch 1600M must be 850 nm wavelength, multimode
cable that are fitted with SC-type connectors.
B-5