Internal Scanners; Linear Imager Settings - Intermec CN2B User Manual

Internal Scanners

Linear Imager Settings

CN2B Mobile Computer User's Manual
The Intermec Internal Scanner feature allows Automatic Data Collection
(ADC) by accepting data from the COM1 port and wedging it into the
keyboard interface. You can enable or disable this feature from the Today
screen on the CN2B Computer.
Do the following from the Intermec Settings applet. Information about the
settings you can configure with this applet is described in the Intermec
Computer Command Reference Manual. The online manual is available from
the Intermec web site at www.intermec.com.
1 From the CN2B Computer, tap Start > Settings > the System tab > the
Intermec Settings icon.
2 Tap the Data Collection option, then tap (+) to expand Internal Scan-
ner. This sample screen is for the EV10 scanner model.
Depending on what is selected as the scanner model, image settings, decode
security, and virtual wedge are configured from the Intermec Settings
applet. See the the Intermec Computer Command Reference Manual, avail-
able from the Intermec web site at www.intermec.com, for more informa-
tion about each enabled option.
Chapter 6 — Scanner Support
119