Intermec CN2B User Manual page 220

Appendix A — Configurable Settings
204
Web Enrollment
Tap Web Enrollment to obtain a user certificate over the network from an
IAS Server. Tap ok to return to the Security page.
LEAP (Cisco Lightweight EAP)
LEAP is the Cisco Lightweight version of EAP. See page 192 for informa-
tion about EAP.
Use "LEAP" to configure the use of LEAP as an authentication protocol,
select "Open," "WPA," or "Network EAP" as an association mode, or
assign Network EAP. Note that this defaults to the Network EAP.
To Enable LEAP with an Open Association
1 Set 8021x Security as "LEAP" and Association to "Open."
2 Enter your unique User Name to use this protocol.
3 Select Prompt for password to have the user enter this password each
time to access the protocol, or leave Use following password as selected
to automatically use the protocol without entering a password.
To Enable LEAP with WPA Encryption
1 Set 8021x Security as "LEAP" and Association to "WPA." See page 193
for information about WPA encryption.
2 Enter your unique User Name to use this protocol.
CN2B Mobile Computer User's Manual