Wireless Network Applet - Intermec CN2B User Manual

Wireless Network Applet

CN2B Mobile Computer User's Manual
For CN2B Computers with an imager,
default mappings are shown in the following illustration.
For CN2B Computers without an imager,
the default maps the Record, Calendar, Contacts, and Tasks applications
the top four and the A3 and A4 buttons are "unassigned."
Note: Record, Calendar, Contacts, and Tasks are Pocket PC applications.
See Chapter 2, "Windows Mobile 2003" for information.
• To assign an application to a button, select an application from the
applicable drop-down list box.
• To assign a new application, select the "Add new application" option,
which brings up an Open File dialog and browse Secure Digital storage
cards for new applications.
• To disable or unmap a currently mapped application from a correspond-
ing button, select "unassigned" from the applicable drop-down list.
• Tap Defaults in the lower right corner to restore defaults.
Note: You cannot map an application to more than one button. Should
you assign the same application to two buttons, a verification prompt
appears after the second button to confirm whether you want to remap the
application. If you tap Yes, the applet changes the first button to "unas-
signed" and maps the application to the second button.
Note: All changes are activated immediate upon selection.
Note: See Chapter 4, "Network Support" for information about the
802.11b/g radio module.
Appendix A — Configurable Settings
191