Manual Feeder - Secap SI5400 Operator's Manual

Manual Feeder

SV61611 Rev. B
Use the Manual Feeder to hand feed stapled or unstapled sets of up to five
sheets. The machine waits for each set to be manually fed before folding
and inserting the set into the envelope.
NOTES:
• The feeder type of the item (to be fed manually) in the current job has to be
defined as Manual for the feature to work.
• The job with the manual fed piece can also include items from other feeders,
including sheets or inserts.
To use the Manual Feeder:
1. Select a job that uses the Manual Feeder.
2. Push the Manual Feed lever up.
3. Press TRIAL PIECE to start the machine.
4. Feed each set by pushing the edge into the rollers one at a time.
5. Push the lever down when you are done.
Push the
Manual Feed
lever up.
Figure 2.4: Manual Feed Lever.
Meet the Inserting System • 2
2-7