Loading The Attached Printer - Secap SI5400 Operator's Manual

7 • Add-On Modules
Loading the
Attached Printer
7-10
To load sheets into the Attached Printer:
1. Adjust side guides to accommodate the length and width of the material
2. Load the material no more than the fill line.
Attached Printer Loading Instructions
Color Printer
Monochrome Printer
NOTES:
Do not fan sheets when loading the Attached Printer. Fanning sheets can cause static
•
electricity, which can cause sheets to stick together.
• If your are loading letterhead or check stock, find the paper direction for the desired
fold type on the label in printer or on the Loading Instructions screen.
• To view a demo of the Attached Printer loading process : go to the Home screen and
select "Loading Instructions and Pre-Run Adjustments". Use the UP/DOWN arrow keys
to select a Sheet (being fed by the Attached Printer) from the Mail Piece Icon Tree,
then select "Feeders Setup Demo".
Envelope Type
Standard Flap
Bottom Flap
Envelope Type
Standard Flap
Bottom Flap
Sheet Orientation
Face up, top first.
Face up, bottom first.
Sheet Orientation
Face down, bottom first.
Face down, top first.
SV61611 Rev. B