7 • Add-On Modules
7-16
4. Ensure that the mailing system has been set up to process mail:
•
The class must be set.
•
The rate/weight must be set.
•
The mode must be set (if appropriate).
NOTE: Refer to the Operator Guide for you mailing system for more informa-
tion about processing mail.
5. Adjust the side guide to the width of an envelope that will be used. See
figures below for DP800i requirements.
NOTE: The MMI does not support flats.
Figure 7.15: DP800i Side Guide
DP800i Side Guide
(shown without MMI)
SV61611 Rev. B