Sheets - Secap SI5400 Operator's Manual

Sheets

SV61611 Rev. B
Sheets refer to material that must be folded before being inserted into stan-
dard letter envelopes. In the special case of flats, sheets are not folded. A
group of sheets is referred to as a collation.
Material Substrates
Acceptable paper types include new or recycled bond, text, laser and offset.
Offset coatings including matte, dull or gloss.
NOTE: Use of glossy material may degrade system performance.
Grain
Material may be short or long grain.
Printing
Printing may be simplex or duplex with no restriction on color.
Coating
Varnish applied to sheets to modify finish is allowed.
Laser-Printed Material
Freshly laser-printed material which meets the curl requirements is accept-
able.
Feeder Tower - Sheet Specifications
Parameter
Width
Length
Thickness
Paper Weight
Minimum Value
5 inches (127 mm)
5.31 inches (135 mm)
0.003 inches (0.076 mm)
16 lb. (60 gsm)
Reference • 6
Maximum Value
9.84 inches (250 mm)
14 inches (356 mm)
0.012 inches (0.305 mm)
44 lb. (175 gsm)
6-11