Add-On Modules; About The Add-On Modules; High Capacity Sheet Feeder (Hcsf) - Secap SI5400 Operator's Manual

7 • Add-On Modules
About the Add-
On Modules
High Capacity
Sheet Feeder
(HCSF)
7-2
The system accepts several modules that enable it to maximize perfor-
mance. Included in this list are:
• High Capacity Sheet Feeder
• Flats Sealer
• Attached Printer
• Pre-folded Insert Feeder
• Power Stacker
The HCSF add-on module attaches to the Feed Tower end of the system to
provide greater upstream volume. The HCSF has two Feeder Trays and a
horizontal transport. Each Feeder Tray holds up to 1000 sheets of 20 lb. (80
gsm) paper.
Sheets move from the Feeders in a pre-determined order and travel down
the vertical paper path and into the horizontal transport. Depending on the
job setup, individual sheets are either transported directly into the main unit,
or they accumulate in the horizontal transport into a pre-determined packet
before being transported into the main unit. When Feeder Linking is en-
abled, you can reload and empty the inactive Feeder Tray (that is, the Tray
that is not currently feeding sheets) without interrupting the job run.
The system can handle up to two High Capacity Sheet Feeders. Each HCSF
attaches to the next to form an upstream flow from one to the other and fi-
nally into the main system.
Figure 7.1: HCSF Attached to System
SV61611 Rev. B