Roger Beep; Key Beep; Keypad Lock - Uniden UH820SX-NB Owner's Manual

Operation

Roger Beep

Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT
and VOX transmission.) Roger Beep can be heard through the speaker when
Key Beep is on. Roger Beep is transmitted even if Key Beep is turned off.
However, Roger Beep will not be heard from the speaker.
Press (menu) ten times. rb setting flashes.
1.
2. Press (ch)
change the setting on or off.
3. Press & hold (menu) to save and exit.

Key Beep

Assures the user that the keypad has been properly
pressed by emitting a beep tone. This tone can be
switched on or off.
Press (menu) eleven times. bP setting flashes.
1.
Press (ch)
2.
change the setting on or off.
3. Press & hold (menu) to save and exit.
2

Keypad Lock

To prevent accidental entries, you can lock the keypad.
3
Press and hold (call/lock) for 1.5 Secs until it beeps to
activate Key Lock. The
To unlock the keypad, press and hold
(call/lock) again for 1.5 Secs. The
4
When the Key Lock is active, an error tone will be heard if you
attempt to press any key, except for the following key functions;
NOTE
(LIGHT), (SOS), (PTT), (BOOST) and
5
UNIDEN UH820SX-NB/UH820SX-2NB
DCS - 2
M
Call Tone
D
or or (vol) or
Vibrate Alert
Keylock
or (vol)
or or
M
Key Beep
appears.
VOX
to
to
disappears.
23
M
VOX
D
VOX
Vibrate Alert
VOX
Roger Beep
Call Tone
Key Beep
Scanning
M
GS
Keylock
M
.
UHF CB Radio