Manual Ratio Selection - Sharp AR-6020 Operation Manual

4
Press the [ZOOM] key (
• If the [R] indicator blinks, change the
Note
orientation of the placed original.
• If the copy is made when a Ratio display
indicator is blinking, the copied image may
run off the page.

MANUAL RATIO SELECTION

Copies can be reduced down to 25% or enlarged up to 400%. The [ZOOM] selector keys (
quickly select a ratio from among ten preset ratios. In addition, the [Copy ratio] keys (
select the ratio in increments of 1%.
1
Place the original(s) in the document
feeder tray or on the document glass.
2
If the original is placed on the document
glass, select the original size.
After placing the original, be sure to close the
Note
document cover/RSPF. If left open, parts
outside of the original will be copied black,
causing excessive use of toner.
3
Use the [ZOOM] selector keys (
and [Copy ratio] keys (
select the desired copy ratio.
).
The AUTO IMAGE
indicator ( ) lights up
and the appropriate ratio
for the original size and
paper size is selected.
(The selected ratio
appears.)
(p.44)
)
, ) to
Selecting a preset ratio
Press the [ZOOM]
selector key ( ) to
select the preset ratios of
"AUTO","25%","50%","70
%","81%","86%","115%",
"122%","141%","200%"
and "400%".
Fine adjustment of the
ratio
Any ratio from 25% to
400% can be set in
increments of 1%.
5
Set the number of copies and other
copy settings, and then press the
[START] key (
The copy will be delivered to the paper output
tray.
To cancel automatic ratio selection, press the
Note
[ZOOM] key (
Press a [ZOOM] selector key (
approximate ratio, then press the [Copy ratio] keys
( or ) to increase or decrease the ratio.
To decrease or increase the zoom ratio rapidly, hold
down the [Copy ratio] keys (
If the paper size you want to use does not
Note
appear, change the paper in a tray to the
desired size and then go to step 4.
4
Set the number of copies and other
copy settings, and then press the
[START] key (
The copy will be delivered to the paper output
tray.
COPY FUNCTIONS
).
) again.
) can be pressed to
, ) can be pressed to
) to set the
or ).
(p.39)
).
49
3