Copying Multiple Originals Onto A Single Sheet Of Paper - Sharp AR-6020 Operation Manual

COPYING MULTIPLE ORIGINALS ONTO A SINGLE
SHEET OF PAPER
Multiple originals can be copied onto a single sheet of paper in a selected layout pattern.
This function is convenient for compiling multi-page reference materials into a compact format, or for providing an
overview of all pages of a document on a single page.
2 IN 1 COPY
Pattern 1
• First select the layout pattern as explained in
Note
(solid line or broken line) in the system settings (p.91). When finished, follow the steps below.
• An appropriate ratio setting will be automatically selected based on the size of the originals, the size of the
paper, and the selected number of originals. When using the document glass, reduction is possible to 25%.
When using the RSPF, reduction is possible to 50%. Certain combinations of original size, paper size, and
number of images may result in images being cut off.
• Even if "Rotation copy" is disabled in the system settings, the original images may be rotated if necessary
depending on their orientation and the orientation of the paper.
• 2 IN 1 / 4 IN 1 copy cannot be used in combination with dual page copying (p.56), XY Zoom (p.50), margin shift
(p.63), or erase copy.
Using the document glass
1
Place the first original.
2
Select the original size.
If the original size was not selected, 2 IN 1 / 4 IN
1 copy cannot be used.
3
Press the [2 IN 1 / 4 IN 1] key (
select the desired mode.
4
Set the number of copies and other
settings, and then press the [START]
key ( ).
The data notification indicator (
the original is scanned into memory.
(2 IN 1 / 4 IN 1 Copy)
Pattern 2
"Setting the layout pattern"
(p.64)
(p.44)
(p.44)
) to
The mode is selected in
the order "2 IN 1"
( ), "4 IN 1" ( ),
"Off".
) blinks, and
4 IN 1 COPY
Pattern 1 Pattern 2
(p.62), and
5
When the start indicator lights,
replace the original with the next
original, and then press the [START]
key ( ).
Repeat step 5 until all originals have been
scanned into memory.
To clear the data in memory, press the
Note
[CLEAR] key
6
When all originals have been scanned,
press the [READ-END] key (
The copy is delivered to the paper output tray.
• To cancel 2 IN 1 / 4 IN 1 copying, press the
Note
[CLEAR] key
• To cancel 2 IN 1 / 4 IN 1 copy mode, press
the [2 IN 1 / 4 IN 1] key (
until the 2 IN 1 / 4 IN 1 indicators
( /
Using 2 IN 1 / 4 IN 1 copy in combination with
sort copy
• When 2 IN 1 / 4 IN 1 copying is used, the group
function (p.49) is automatically selected for output.
• If 2 IN 1 / 4 IN 1 copying is selected after sort
copying is selected, the copies will be sorted into
sets.
COPY FUNCTIONS
Pattern 3 Pattern 4
"Border line for 2 IN 1 / 4 IN 1"
( )
.
).
( ).
) repeatedly
) are both off.
61
3