The Start Indicator Is Not Lit In The Usb Memory Scan Mode; Err" Appears In The Display During Usb Memory Scan; Ful" Appears In The Display During Usb Memory Scan - Sharp AR-6020 Operation Manual

TROUBLESHOOTING
Problem
The START indicator is
not lit in the USB
Memory Scan mode.
"ERR" appears in the
display during USB
Memory Scan.
"FUL" appears in the
display during USB
Memory Scan.
110
The USB memory is not recognized or not inserted, or any device
other than USB memory is inserted in the USB port.
→ Check the USB port of the Network expansion kit.
Any device other than USB memory is inserted in the USB port, the
USB memory is write-protected, or it was taken off during USB
Memory Scan.
→ Check your USB memory device and use it properly.
The memory of the USB device became full.
→ Use the USB device with sufficient memory.
Cause and solution Page
–
–
–