Scanning From A Wia-Compliant Application (Windows Vista/7/8) - Sharp AR-6020 Operation Manual

SCANNING FROM A WIA-COMPLIANT APPLICATION
(Windows Vista/7/8)
If you are using Windows Vista/7/8, you can use the WIA driver to scan from Paint and other WIA-compliant
applications. The procedure for scanning using Paint is explained in the following.
Note
WIA cannot be used on network function standard models and on models with the network expansion kit installed.
1
Place the original that you wish to
scan on the document glass/RSPF.
For information on setting an original for
scanning, refer to "SCANNING USING THE
KEYS ON THE MACHINE"
2
Start Paint and then click the "File"
menu and select "From Scanner or
Camera".
The scan screen of the WIA driver will appear.
If you have WIA drivers for other devices
Note
installed in your computer, the "Select Device"
screen will open. Select "SHARP AR-xxxx"
and click the "OK" button.
(p.79).
3
Select the paper source and picture
type, and click the "Preview" button.
• If you select "Document Feeder" for the
Note
"Paper source" and click the "Preview"
button, the top original in the RSPF is
previewed. The previewed original is sent to
the original exit area, so you will need to
return it to the RSPF before starting the
scanning job.
SCANNER FUNCTIONS
The preview image will
appear.
If you placed the original
on the document glass,
select "Flatbed" for the
"Paper source".
If you placed the original in
the RSPF, select
"Document Feeder" for the
"Paper source" and specify
the original size in "Page
size".
87
5