Removing The Ice Maker Storage Bln - KitchenAid KSHS22Q Use And Care Manual

Removing the ice maker storage bin
The ice maker storage binholds up to
8.5pounds (3.8kg) of Ice.Remove unused
Ice perlodically t o reduce the potential for
off-taste o r odor bulld-upInIce.
IMPORTANT: The first few batches of Ice from
the Ice maker may have an off-taste. Thls Is
from new plumbing and parts. Throw the first
few batches of Ice away and make a new
supply.
To remove storage bln:
Remove the storage blnto supply large
quanfities of Ice or forcleanlng.
I. Pull the coverlng panel out from the
bottom and sllde It to the rear.
2. Uttthe Ice maker signalarm until y ou feel
It clickIntothe OFF poslflon. I cecan still be
dispensed when the freezer door Is closed,
but no more can be made.
3. Uftthe frontof the storage bln and pullIt
out.
4. Empty the bln.Use hot or warm water to
melt the ice If necessary. Never use
anythlng sharp to break up the Ice Inthe
bin.ThIs can damage the bin and
dIspensermechanism.
5. Wash wlth mllddetergent, l_nseand dry
well.Do not use harsh or abrasivecleaners
or solvents.
Panel
To replace storage bln:
I. Make sure bin Is pushed in all the way.
2. Push the Ice maker slgnal arm down to the
ON position to restart ice production.
3. Lower covering panel.
14