Changlng The Control Settings; Removing The Refrlgeratot Door Blns - KitchenAid KSHS22Q Use And Care Manual

Changing the control settings
To change the temperature settings, follow
the steps below:
1. Adjust the Refrigerator Control first.
2, Walt at least 24 hours before making
further adjustments. Thisglves the
refrigerator and/or freezer time to reach
the set temperature.
3. Adjust the Freezer Control If necessary.
To make the refrlgerator or freezer colder,
slide the control toward the number 4 setting.
To make the refrigerator or freezer lesscold,
slide the control toward the number I setting.
Changing elther the Refrigerator Control or
the Freezer ConJTol w ill affect the
temperatures of both compartments.
Use the settingslisted In the chart below as a
guideline when adjusting the temperature
controls.
The following reasons can cause the
conditions listed below:
• Door opened often
• Large amount of food added
• Room temperature too warm
* Room temperature too cold (Refrigerator
can't cycle often enough.)
• Controls not set correctly for your
conditions
• Heavy Ice usage
CONDITION:
Refrigerator section Istoo warm
Freezer section Is too warm
Refrigerator section Istoo cold
Ice Isn't made fast enough
Both sections are too warm
RECOMMENDEDCONTROLSETTING ADJUSTMENTS:
Refrlgerator Freezer
3 2
3 3
3 3
3 3
3 3
Removing the refrigerator door bins
To remove bins:
I. LJftbln up.
2. Pullbln straight out.
To replace bins:
I. Hold back of bin above desired bin guide.
2. Push bin back and down until It stops.