Changing
the light bulbs
Electrlcal Shock Hazard
Before removing a light bulb, elther
unplug the refrigerator or dlsconnect
the
elecJTlclty leading to the refrigerator at
the main power supply.
Failure to do so could result In personal
Injury or electrical shock.
To change refrlgerator llght:
I. Disconnect refrigerator from power supply,
2. Reach behind Control Console to remove
bulb.
3. Remove bulb and replace with a 40-watt
tubular appllance
bulb.
4. Reconnect refrigerator to power supply.
To change crlsper llght:
I. Disconnect refrigerator from power supply.
2. Remove crisper and cover. (See page 11,)
3. Remove bulb and replace with a 40-watt
appliance
bulb.
4. Reconnect refrigerator to power supply.
i
.o-i
IV_/__Refrlgerator
/
_,_
light bulb
Crisper llght
To change upper freezer llght:
(KSRS25Qand KSRB25Q)
I. Disconnect refrigerator from power supply,
2. Remove light shield by pulling top of shield
forward.
3. Remove bulb and replace with a 40-watt
appUance bulb.
4. Replace light shield.
5. Reconnect refrigerator to power supply.
To change lower freezer llght:
I. Disconnect refrigerator from power supply.
2. Push In sldesof light shield until It snaps
free.
3. Remove bulb and replace with a 40-watt
appliance
bulb,
4. Replace light shield.
5. Reconnect refrigerator to power supply.
I Op r..z°, I
light bulb
Lower freezer light bulb
19